1.

 

OD-1 OVERDRIVE

 

 

 

 

 

 

 

 

Programmable Knobs

Description

DRIVE: Set signal gain.
TONE:
Set your preferred tone color, middle value 128 will filter both higher & lower frequencies evenly. When the value is more close to 255, Tone control works more like a high-pass filter. When the value is more close to 0, Tone control works more like a low-pass filter.
VOLUME: Set output volume.
   
   

2.

FZ-1 FUZZ

 

Programmable Knobs

Description

 
SUSTAIN: Adjust the sound from weak to hard edged fuzz.  
TONE: Adjust to have more low frequencies or high frequencies.  
VOLUME: Set output volume.  
     
   

 

3.

HDS-1 HOT DISTORTION

 

 

 

 

 

 

 

Programmable Knobs

Description

 
DRIVE: Set signal gain.  
TONE: Adjust to have more low frequencies or high frequencies.  
VOLUME: Set output volume.  
     
     

4.

MDS-1 METAL DISTORTION

 

 

 

 

 

 

 

Programmable Knobs

Description

 
BASS: Set the low frequencies.  
MID: Set the middle frequencies.  
MID-SHIFT:
"Mid" control acts as a band-pass filter. “Mid-Shift” will shift the band-pass filter to lower portion or higher portion of frequencies. This design can cover almost full band of middle frequencies filtering with minimum numbers of control knob. You should set “Mid-Shift” value to fix your preferred middle frequencies band first and then set “Mid” to refine the middle frequencies.
 
HIGH: Set the high frequencies.  
GAIN: Set signal gain/distortion.
VOLUME: Set output volume.
     

5.

CH-1 CHORUS

 

 

 

 

 

 

 

Programmable Knobs

Description

 
SPEED: Set signal vibration speed.  
DEPTH: Set the level of signal vibration.  
TONE: Adjust to have more or less high frequencies.  
MIX.BAL: Aadjust to have more or less chorus effect.  
     

6.

FL-1 FLANGER

 

 

 

 

 

 

 

Programmable Knobs

Description

 
SPEED: Set signal vibration speed.  
DEPTH: Set the level of signal vibration.  
MANUAL: Set the offset of depth.  
FEEDBACK: Aadjust to have more or less signal feedback into input.  
     

7.

PH-1 PHASER

 

 

 

 

 

 

 

Programmable Knobs

Description

 
SPEED: Set signal vibration speed.  
DEPTH: Set the level of signal vibration.  
MANUAL: Set the offset of depth.  
FEEDBACK: Aadjust to have more or less signal feedback into input.  
     

8.

AW-1 AUTO WAH

 

 

 

 

 

 

 

Programmable Knobs

Description

 
SENS: Set the response to change of input picking signal.  
MANUAL: Move the frequencies pass-band to be lower or higher.  
LPF / WAH:
Move to LPF (Low-Pass Filtering) to cut more high frequencies, or move to WAH to act as conventional auto-wah (cuts both low and high frequencies).
 
LEVEL: Set the output volume.  
     

9.

TR-1 TREMOLO

 

 

 

 

 

 

 

Programmable Knobs

Description

 
RATE: Set the speed of signal amplitude variation.  
DEPTH: Set range of signal amplitude variation.  
WAVE:
Set to 0 to have triangular wave modulation (smooth signal amplitude variation), or set to 255 to have square wave modulation (rapid amplitude variation).
 
     
     

10.

DL-1 DELAY / ECHO / REVERB

 

 

 

 

 

 

 

Programmable Knobs

Description

 
TIME: Set time delay value.  
BLEND: Adjust to have more or less mixed effect.  
REPEAT:
Adjust to have more or less delayed signal going back to input.
 
     
     

11.

CP-1 COMPRESSOR / NOISEGATE

 

 

 

 

 

 

 

Programmable Knobs

Description

 
GAIN: Set signal gain.  
NOISEGATE:
Set the signal triggering level, any signal level less than this value will be removed.
 
COMPRESSION:
Set the signal compression. Bigger value will have longer signal sustain. Bigger value will also have noise louder when signal is getting weak.
 
ROTATION:
Set the upper limit of signal input. Any signal over this rotations point will be suppressed to maintain a steady volume output.
 
     

12.

AC-1 ACOUSTIC SIMULATOR

 

 

 

 

 

 

 

Programmable Knobs

Description

 
LEVEL: Set output volume.  
BODY: Set the amount of bass frequencies.  
MIDDLE: Set the amount of middle frequencies.  
TOP: set the amount of high frequencies.  
MODE:
Four hardware preset modes – STANDARD, JUMBO, ENHANCE & PIEZO.
 
   

13.

OC-1 OCTAVER

 

 

 

 

 

 

 

Programmable Knobs

Description

 
2OCT.DOWN: Set amount of second lower octave signal.  
1OCT.DOWN: Set amount of first lower octave signal.  
NORMAL: Set amount of direct signal.  
1OCT.UP: Set amount of first upper octave signal.